RedMax CHT2250 Manuel de l'opérateur télécharger pdf (Page 14)

US-14

CHT2250

1. Oil the blade to prevent rust.

2. Empty the fuel tank and put the cap

back on.

3. Remove the spark plug, pour a small

amount of oil into the cylinder.

4. Rotate the crankshaft several times

using the starting rope in order to

distribute the oil. Put the spark plug

back in.

5. Wrap the engine with a plastic sheet.

6. Store the trimmer in a dry place,

preferably not in direct contact with the

floor and away from heat sources.

9. Storage

10. Disposal

• When disposing your machine, fuel or

oil for the machine, be sure to allow

your local regulations.

11. Troubleshooting guide

Case 1. Starting failure

CHECK PROBABLE CAUSES ACTION

fuel tank ➞ incorrect fuel ➞ drain it and with correct fuel

fuel filter ➞ fuel filter is clogged ➞ clean

carburetor adjustment screw ➞ out of normal range ➞ adjust to normal range

sparking (no spark) ➞ spark plug is fouled/wet ➞ clean/dry

➞ plug gap is incorrect ➞ correct (GAP: 0.65 mm)

spark plug ➞ disconnected ➞ retighten

Case 2. Engine starts but does not keep running/Hard re-starting.

CHECK PROBABLE CAUSES ACTION

fuel tank ➞ incorrect fuel or staled fuel ➞ drain it and with correct fuel

carburetor adjustment screw ➞ out of normal range ➞ adjust to normal range

muffler,cylinder (exhaust port) ➞ carbon is built-up ➞ wipe away

air cleaner ➞ clogged with dust ➞ wash

cylinder fin, fan cover ➞ clogged with dust ➞ clean

When your unit seems to need further service, please consult with our service shop in your area.

1 2 ... 9 10 11 12 13 14 15 16 17

Pas de commentaire

RedMax CHT2250 Manuel de l'opérateur Page 14