RedMax PSZ2500 Spécifications télécharger pdf (Page 25)

9. Maintenance

MA8

MA7

Place your file on the cutter and push straight

forward. Keep the file position as illustrated. (MA6)

After every cutter has been set, check the depth

gauge and file it to the proper level as illustrated.

(MA7)

Be sure to round off the front edge to reduce

the chance of kickback or tie-strap breakage.

(1) Appropriate gauge checker

(2) Make the shoulder round

(3) Depth gauge standard

Make sure every cutter has the same length and

edge angles as illustrated. (MA8)

(4) Cutter length

(5) Filing angle

(6) Side plate angle

(7) Top plate cutting angle

WARNING

❲

❳

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 39 40

Pas de commentaire

RedMax PSZ2500 Spécifications Page 25