RedMax BCZ350S Manuel de l'opérateur télécharger pdf (Page 22)

US-20

BCZ350S

7. Working techniques

6. Always hold the machine with both hands. Hold the machine on

the right side of your body.

7. Keep the cutting attachment below waist level.

8. Switch off the engine before moving to another area. Fit the

transport guard before carrying or transporting the equipment

any distance.

9. Never put the machine down with the engine running unless

you have it in clear sight.

• Neither the operator of the machine nor anyone else may

attempt to remove the cut material while the engine is

running or the cutting equipment is rotating, as this can

result in serious injury.

•Stop the engine and cutting equipment before you remove

material that has wound around the blade shaft as

otherwise there is a risk of injury. The bevel gear can get

hot during use and may remain so for a while afterwards.

You could get burnt if you touch it.

• Watch out for thrown objects. Always wear approved eye

protection. Never lean over the cutting attachment guard.

Stones, rubbish, etc. can be thrown up into the eyes

causing blindness or serious injury.

• Keep unauthorised persons at a distance. Children,

animals, onlookers and helpers should be kept outside the

safety zone of 15 m. Stop the machine immediately if

anyone approaches. Never swing the machine around

without first checking behind you to make sure noone is

within the safety zone.

WARNING

■ General working instructions

This section describes the basic safety precautions for working

with brush cutters and trimmers.

If you encounter a situation where you are uncertain how to

proceed you should ask an expert. Contact your dealer or your

service workshop.

Avoid all usage which you consider to be beyond your capability.

You must understand the difference between forestry clearing,

grass clearing and grass trimming before use.

■ Basic safety rules

1. Look around you:

• To ensure that people, animals or other things cannot affect

your control of the machine.

• To ensure that people, animals, etc., do not come into contact

with the cutting attachment or loose objects that are thrown out

by the cutting attachment.

•

CAUTION! Do not use the machine unless you are able to call

for help in the event of an accident.

2. Inspect the working area. Remove all loose objects, such as

stones, broken glass, nails, steel wire, string, etc. that could be

thrown out or become wrapped around the cutting attachment.

3. Do not use the machine in bad weather, such as dense fog,

heavy rain, strong wind, intense cold, etc. Working in bad

weather is tiring and often brings added risks, such as icy

ground, unpredictable felling direction, etc.

4. Make sure you can move and stand safely. Check the area

around you for possible obstacles (roots, rocks, branches,

ditches, etc.) in case you have to move suddenly. Take great

care when working on sloping ground.

5. Keep a good balance and a firm foothold.

IMPORTANT

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 119 120

Commentaires sur ces manuels

Pas de commentaire

RedMax BCZ350S Manuel de l'opérateur Page 22

Commentaires sur ces manuels

Produits connexes et manuels pour Tondeuses à gazon RedMax BCZ350S