Redmax GZ4000 Manuel d'utilisateur télécharger pdf (Page 12)

US-12

GZ4000

8. Operation

properly or in the engine failing to

operate at its normal speed, and for

this reason you should always be sure

to return the unit to normal operating

mode if there is no danger of icing

occurring.

■ HOW TO SWITCH BETWEEN

OPERATING MODES (F19)

1. Flip the engine switch to turn off the

engine.

2. Remove the cover to the air filter,

remove the air filter, and then remove

the choke knob from the cylinder

cover.

3. Loosen the screws holding the cylinder

cover in place (i.e., the three screws on

the inside and the one screw on the

outside of the cover), and then remove

the cylinder cover.

4. Press with your finger down on the

icing cap located on the right-hand side

of the cylinder cover to remove the

icing cap.

5. Adjust the icing cap so that the “snow”

mark faces upwards and then return it

to its original position in the cylinder

cover.

6. Fix the cylinder cover back into its

original position, and then fix all other

parts back into their proper positions.

(1) Choke knob

(2) Cylinder cover

(3) Icing cap

F19

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Commentaires sur ces manuels

Pas de commentaire