Redmax GZ4000 Manuel d'utilisateur télécharger pdf (Page 4)

US-4

GZ4000

3. Warning labels on the machine

(a) The port to refuel “MIX GASOLINE”

Position: Fuel cap

(b) The port to top up chain oil

Position: Oil cap

the engine stops immediately.

Position: Rear-left of the unit

(d) Starting the engine. If you pull out the

choke knob (at the back-right of the rear

handle) to the point of the arrow, you

can set the starting mode as follows:

• First-stage position – starting mode

when the engine is warm.

• Second-stage position – starting mode

when the engine is cold.

Position: Upper-right of the aircleaner

cover

(e) The screw under the “H” stamp is The

High-speed adjustment screw.

The screw under the “L” stamp is The

Slow-speed adjustment screw.

The screw at the left of the “T” stamp is

the Idle adjustment screw.

Position: Left side of the rear handle

(f) Shows the directions that the chain

brake is released (white arrow) and

activated (black arrow).

Position: Front of the chain cover

(g) If you turn the rod by screwdriver follow

the arrow to the "MAX" position, the

chain oil flow more, and if you turn to the

"MIN" position, less.

Position: Bottom of the power unit

4. Symbols on the machine

(1) Read operator's instruction book before operating this machine.

(2) Wear head, eye and ear protection.

(3) Use the chain saw with two hands.

(4) Warning! Danger of kickback.

(5) Read, understand and follow all warnings.

*1: The year will be changed every year of manufacturing.

*2: The initial number will be changed every year of

manufacturing.

USE JASO FD OR ISO L-EGD GRADE 50:1 OIL

MANUFACTURED:

THIS ENGINE MEETS U.S. EPA AND CALIFORNIA

EXH/EVP REGS FOR 2009*

S.O.R.E.

ENGINE FAMILY :

9HQZS.0404FG*

DISPL.:

40cc

EMISSION CONTROL SYSTEM :

EXH;EM

COMPLIANCE PERIOD : 125 HOURS

REFER TO OPERATOR'S MANUAL FOR MAINTE-

NANCE, SPECIFICATIONS AND ADJUSTMENTS.

EMISSION CONTROL INFORMATION

■ EMISSION CONTROL

An emission control label is located on the engine.

For safe operation and maintenance, symbols are

carved in relief on the machine.

According to these indications, please be careful not

to make any mistake.

1 2 3 4 5 6 7 8 9 ... 19 20

Commentaires sur ces manuels

Pas de commentaire

Redmax GZ4000 Manuel d'utilisateur Page 4

Commentaires sur ces manuels

Produits connexes et manuels pour Outil à essence Redmax GZ4000